rebuilding a disk on branch, expect some slowness

| | Comments (0)

But no reboot. I'm rebuilding off a hot spare.

[lsc@branch ~]$ cat /proc/mdstat
Personalities : [raid1] 
md2 : active raid1 sdc2[0] sda2[1]
      478375424 blocks [2/2] [UU]
      
md1 : active raid1 sdf2[2] sdd2[3](F) sde2[4](F) sdb2[0]
      478375424 blocks [2/1] [U_]
      [=>...................]  recovery =  6.4% (30769792/478375424) finish=524.6min speed=14216K/sec
      
md0 : active raid1 sdf1[3] sdd1[4](F) sde1[5](F) sdc1[0] sdb1[1] sda1[2]
      10008384 blocks [4/4] [UUUU]
      
unused devices: 
[lsc@branch ~]$ 

Leave a comment

About this Entry

This page contains a single entry by luke published on July 17, 2010 2:56 AM.

problem on stables... up domains are OK, down domains stay down. was the previous entry in this blog.

whetstone reboot is the next entry in this blog.

Find recent content on the main index or look in the archives to find all content.